d2w 1%Magic Inclusion Rate: Technical Capability

Why d2w 1% Inclusion Rate? This is a frequently asked question, and the main reason for d2w to master the 1% inclusion rate lies on d2w the complete technical backup and scientific advisory board who have continued research and development of d2w Eco-compatible Plastic Technology for more than 15 years. The scientific advisory board includes the inventor of Oxo-Biodegradable Technology, Professor Gerald Scott, the top polymer scientist and a few scientist and scholar working in this field: Professor Emo Chiellini(Italy), Professor Jacques Lemaire(France), Professor Ignacy Jakubowicz(Sweden and Professor Telmo Ojeda(Brazil)

Why d2w 1%?

One of the reasons to keep d2w inclusion rate at the extremely small amount is to minimize all the possible impacts to polymer manufacturing process and remain all the properties of original polymer products. Besides, 1% is a control factor to all the experiments and verification d2w Technical Team has done, aiming to integrate results theoretically and practically.。

d2w Oxo-Biodegradation Plastic Degradation Time?

The controlled safe service life of d2w eco-compatible products can be as less as a few months and upto 5~6 years. After the safe service life, the d2w products can degrade in the environment. The time takes to degrade is the issues both Buyer and Manufacturer care: they don’t want d2w products to degrade in the warehouse; they don’t want d2w products to degrade when consumer using it, but want them to degrade after using them. Actually, as long as d2w products are within the safe service life, it will not show degradation ; thus, if in normal use, if will not suddenly degrade or toally disappear in the warehouse. However, heat and UV will accelerate aging of plastics; thus, inappropriate storage of d2w products and continuous and direct heat and UV exposure will make plastics to show degradation earlier.

d2w 2% will make plastics degrade faster?
d2w inclusion rate has nothing to do with the degradation time; the key is d2w formula with a certain percentage of different combination and process of metal salt and d2w proprietary polymer stabilizers. d2w inclusion rate is always at 1%, it does not change whether degrade within 1 year or within 2 years. Thus, the Technical Enquiry Form is substantially important; because we need to gather process route and polymer information from manufacturers to make sure d2w 1% will successfully work in each manufacturer.